LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 187 (Bumpers) >> 63 Bumpers >> Rear Bumper >> Bumper Cover Lower Section, Removing And Installing >> Bumper Cover Lower Section, Removing And Installing, RS 5 From Product Improvement >> Removing

Bumper Cover Lower Section, Removing And Installing, RS 5 From Product Improvement: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- If equipped, disconnect the connector -2- and free up the wiring harness.

GWWA63-11948Courtesy of AUDI OF AMERICA, LLC

-- Free up the Power Rear Lid Opening Sensor -G750- -1-.

-- Release the catches -2 and 3- and remove the lower section -1- from the bumper cover.

GWWA63-12007Courtesy of AUDI OF AMERICA, LLC