Molded Foam Part Mount, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Remove the front parking aid sensor. Refer to FRONT PARKING AID SENSOR, REMOVING AND INSTALLING .
-- Free up the wiring harness -3-.
-- Remove the bolt -2-.
-- RS 4 and RS 5: disconnect the catch -arrow- or in this position remove the bolt and mount -1-.