Overview - Spring

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Suspension Strut, Shock Absorber, Spring

Courtesy of AUDI OF AMERICA, LLC

Rear Lower Transverse Link
- Removing and installing. Refer to REAR LOWER TRANSVERSE LINK, REMOVING AND INSTALLING .
  WARNING:
  If the coil spring breaks resulting in surface damage to the transverse link, then the transverse link must be replaced.
Coil Spring
- Removing and installing. Refer to SPRING, REMOVING AND INSTALLING .
- Installation position. Refer to Fig 2.
Upper Spring Support
- Installation position. Refer to Fig 2.
Lower Spring Support
- Installation position. Refer to Fig 2.

Coil Spring and Spring Plate Installation Position

Fig 2: Coil Spring and Spring Plate Installation Position

Courtesy of AUDI OF AMERICA, LLC

The end of the spring -1- must be positioned to the stop on the spring plates -2- -arrow-.
The positioning pins of the spring plate must engage at the top in the holes in the body -3- and at the bottom in the holes in the rear transverse link -4- as shown.