Stabilizer Bar, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
-- Before starting the procedure, determine the curb weight position. Refer to WHEEL BEARING IN CURB WEIGHT POSITION, LIFTING VEHICLES WITH COIL SPRING .
-- Equipped on some models: remove the right diagonal brace. Refer to DIAGONAL BRACES, REMOVING AND INSTALLING .
-- Remove the left and right bolts -arrows-.
-- Disconnect the left and right threaded connection -1- and remove the stabilizer bar -2-.
NOTE:
The installation position is shown for the AWD equipment version.