Active Steering Safety Lock (Locking Solenoid), Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- Place the adjusting element according to the mark applied during removal and tighten (use the socket included in the repair kit). Refer to Figure.
-- Connect the Vehicle Diagnostic Tester.
-- Switch the ignition on.
-- Select and start the Diagnostic operating mode.
-- Select the Test plan tab.
-- Select the Select individual test button and select the following tree structure consecutively:
- Chassis
- Steering
- 0001 - OBD-capable system
- 001B - Active Steering Control Module - J792
- 001B - Active Steering Control Module, functions
- 001B - Basic setting (repair group 48)
- 001B - Basic setting complete
-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.