LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 183 (Front Suspension) >> 40 Front Suspension >> SUBFRAME >> Coupling Rod, Removing And Installing >> Removing

Coupling Rod, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

-- Before starting the procedure, determine the curb weight position. Refer to WHEEL BEARING IN CURB WEIGHT POSITION, LIFTING VEHICLES WITH COIL SPRING .

-- Remove the front wheel spoiler. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .

-- Remove the nuts -1 and 3- and remove the drive axle cover -2-.

GWWA66-11638Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -arrows-.

GWWA40-10505Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 and 3- and coupling rod -2-.

NOTE:

Push the front wheels in accordingly if required to remove the lower bolt.