Drive Axle, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
-- Loosen the connection between the drive axle and wheel hub. Refer to DRIVE AXLE THREADED CONNECTION, LOOSENING AND TIGHTENING .
-- Remove the front wheel. Refer to WHEELS AND TIRES .
-- Left drive axle: Remove the subframe shield. Refer to SUBFRAME SHIELD, REMOVING AND INSTALLING .
-- Right drive axle: Remove the subframe shield and move it to the side. Refer to SUBFRAME SHIELD, REMOVING AND INSTALLING .
-- Remove the nuts -1 and 3- and remove the drive axle cover -2-.
-- Remove the bolts -arrows- that connect the drive axle and flange shaft.
-- Remove the drive axle, and do not damage the CV boot and the drive axle coating while doing so.