Cam Actuator, Removing And Installing

WARNING: This page is about a different car, the 2022 Audi S5, 2021 Audi S5, and 2020 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Cylinder Bank 1 (Right) Cam Actuator, Removing

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

All additional procedures are described. Refer to CAMSHAFT, REMOVING AND INSTALLING .

Cylinder Bank 2 (Left) Cam Actuator, Removing

Courtesy of AUDI OF AMERICA, LLC

-- Remove the Engine Control Module -J623- from the bracket and move to the side. Refer to Engine Control Module -J623-, REMOVING AND INSTALLING .

-- Free up the coolant line -3- and wiring harness -2-.

-- Remove the bolts -arrows- and remove the engine control module bracket -1-.

All additional procedures are described. Refer to CAMSHAFT, REMOVING AND INSTALLING .

Installing

Additional procedures:

-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

Tightening Specifications

Refer to OVERVIEW - ENGINE CONTROL MODULE