Cylinder Bank 1 (Right) Camshaft Housing, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi S5, 2021 Audi S5, and 2020 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Loosen the hose clamp -2- and disconnect the hose for the EVAP system.
-- Always seal the open lines and connections with clean plugs from the Engine Bung Set:VAS6122 .
All procedures are described. Refer to CAMSHAFT HOUSING, REMOVING AND INSTALLING .