Vibration Damper, Removing And Installing, 3.0L Engine: Removing
WARNING: This page is about a different car, the 2022 Audi S5, 2021 Audi S5, and 2020 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the lock carrier cover, right and left air intake grille as well as the bumper cover end plate. Refer to Front Bumper .
-- Release the catches -arrow- and remove the air ducts -1 and 3-.
-- Unclip the lower air duct -2-.
-- Remove the left and right bolt -2- and push the radiator bracket -1- with the bolt toward the front in direction of -arrow-.
All additional procedures are described. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING .