Turbocharger, Removing And Installing, Cylinder Bank 2 (Left) 2.9L Engine: Removing

WARNING: This page is about a different car, the 2022 Audi S5, 2021 Audi S5, and 2020 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the upper air duct pipe (refer to AIR DUCT PIPE, REMOVING AND INSTALLING ) and pivot to the left side.

-- Remove the Engine Control Module -J623-. Refer to Engine Control Module -J623-, REMOVING AND INSTALLING .

-- Free up the connector -arrow-.

Courtesy of AUDI OF AMERICA, LLC

-- Free up the coolant line -3- and wiring harness.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the engine control module bracket -1-.

All additional procedures are described under: TURBOCHARGER, REMOVING AND INSTALLING .