Turbocharger, Removing And Installing, 3.0L Engine: Removing
WARNING: This page is about a different car, the 2022 Audi S5, 2021 Audi S5, and 2020 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine cover and heat shield. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Remove the upper air duct pipe. Refer to AIR DUCT PIPE, REMOVING AND INSTALLING .
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
-- Remove the bolts -arrows- and then remove the air duct pipe -1- from the turbocharger.
-- Remove the bolt -3- and the line -2- for the EVAP system and move to the side.
All additional procedures are described. Refer to TURBOCHARGER, REMOVING AND INSTALLING .