Oil Pan Lower Section, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi S5, 2022 Audi RS 5, 2021 Audi S5, 2021 Audi RS 5, and 2020 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- Engine oil drained. Refer to ENGINE OIL .
-- If installed, remove the bolt -1- and move the bracket -2- and wiring harness to the side.
-- Disconnect the connector -arrow- on the Oil Level Thermal Sensor -G266-.
-- Free up the wires.
-- Loosen and remove the bolts in the following sequence: -17 to 1-.
-- Loosen and remove the oil pan lower section carefully from the bonding.