Overview - Engine Oil Cooler

WARNING: This page is about a different car, the 2022 Audi S5, 2022 Audi RS 5, 2021 Audi S5, 2021 Audi RS 5, and 2020 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Engine Oil Cooler

Courtesy of AUDI OF AMERICA, LLC

O-Ring
- Always replace after removing.
O-Ring
- Always replace after removing.
Spray Nozzle Valve
- Removing and installing. Refer to SPRAY NOZZLE VALVE, REMOVING AND INSTALLING .
Seal
- Always replace after removing.
Plug
- 10 Nm + 45°
- Always replace after removing.
Seals
- Always replace after removing.
O-Rings
- Not available separately; replace if leaking -item 8- OVERVIEW - ENGINE OIL COOLER => List Item:Hose or damaged
Hose
- For the crankcase ventilation
- Cannot be removed without being damaged
- For the removal:
  - Remove the right 2.9L turbocharger. Refer to TURBOCHARGER, REMOVING, CYLINDER BANK 1 (RIGHT), 2.9L ENGINE .
  - Remove the 3.0L turbocharger. Refer to TURBOCHARGER, REMOVING AND INSTALLING, 3.0L ENGINE .
Engine Oil Cooler
- Removing and installing. Refer to ENGINE OIL COOLER, REMOVING AND INSTALLING .
- Change the coolant after replacing
Bolt
- 9 Nm
Seals
- Always replace after removing.