Coolant Shut-Off Valve, Removing And Installing, 3.0L Engine: Installing

WARNING: This page is about a different car, the 2022 Audi S5, 2022 Audi RS 5, 2021 Audi S5, 2021 Audi RS 5, and 2020 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

Replace the O-ring and seal after removing.
Check the vacuum hoses for damage before the assembly and replace if necessary.

-- Install the front coolant pipe. Refer to COOLANT PIPES, REMOVING AND INSTALLING .

There may be additional procedures depending on the model. Refer to COOLANT VALVES, REMOVING AND INSTALLING .