Drive Plate, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi S5, 2022 Audi RS 5, 2021 Audi S5, 2021 Audi RS 5, and 2020 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- The transmission is removed. Refer to the appropriate Service Information .
-- Insert the : 10-201 to loosen the bolts.
CAUTION:
Risk of damaging the outer surface of the bearing flange at the drive plate due to incorrect handling.
- To loosen and tighten the drive plate bolt use the following tools.
-- Remove the bolts, drive plate -1- and sensor wheel.