LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 168 (Crankshaft, Cylinder Block [CWGD,DECA,CZSE,DLZA,DKMB,CZSA,DCBD,DCBE] [Cabriolet]) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Sub-Assembly Bracket, Removing And Installing >> Starter Generator Bracket, Removing And Installing >> Removing

Starter Generator Bracket, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi S5, 2022 Audi RS 5, 2021 Audi S5, 2021 Audi RS 5, and 2020 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the starter generator. Refer to GENERATOR, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and the bracket -1-.

Fig 1: Starter Generator Bracket -1-
GWWA13-11294Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals