LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 168 (Crankshaft, Cylinder Block [CWGD,DECA,CZSE,DLZA,DKMB,CZSA,DCBD,DCBE] [Cabriolet]) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Sub-Assembly Bracket, Removing And Installing >> A/C Compressor Bracket, Removing And Installing, 2.9L Engine Without Electrical Compressor >> Removing

A/C Compressor Bracket, Removing And Installing, 2.9L Engine Without Electrical Compressor: Removing

WARNING: This page is about a different car, the 2022 Audi S5, 2022 Audi RS 5, 2021 Audi S5, 2021 Audi RS 5, and 2020 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the A/C compressor from the bracket and tie it up on the left side. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING FROM BRACKET .

-- Remove the ribbed belt tensioner for the A/C compressor. Refer to RIBBED BELT TENSIONER FOR A/C COMPRESSOR, REMOVING AND INSTALLING, 2.9L ENGINE .

-- Remove the bolt -1-, and only loosen the nut -2-.

GWWA13-11250Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -2 and 3- and the bracket -1- for the A/C compressor.

Fig 1: A/C Compressor Bracket
GWWA13-11243Courtesy of AUDI OF AMERICA, LLC