Ribbed Belt TENSIONER For A/C Compressor, Removing And Installing, 2.9L Engine: Removing
WARNING: This page is about a different car, the 2022 Audi S5, 2022 Audi RS 5, 2021 Audi S5, 2021 Audi RS 5, and 2020 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Depending on the model, preliminary work may be required. Refer to RIBBED BELT TENSIONER, REMOVING AND INSTALLING .
-- If still installed, release the tension on the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .
-- Push the coolant hose slightly to the side to remove the bolt -arrow- and remove the tensioner -1-. (shown on the engine without electrical compressor).