LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 168 (Crankshaft, Cylinder Block [CWGD,DECA,CZSE,DLZA,DKMB,CZSA,DCBD,DCBE] [Cabriolet]) >> 13 Crankshaft, Cylinder Block >> Crankshaft >> Sensor Wheel, Removing And Installing >> Removing

Sensor Wheel, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi S5, 2022 Audi RS 5, 2021 Audi S5, 2021 Audi RS 5, and 2020 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the drive plate. Refer to DRIVE PLATE, REMOVING AND INSTALLING .

CAUTION:

Do not place the sensor wheel near magnets (for example lamp base, speakers).

There is a risk of destroying the sensor wheel by magnetic force.

- Before installing the drive plate/flywheel or sensor wheel, check the function of the sensor wheel.

-- Remove the sensor wheel -arrow-.

Fig 1: Identifying Sensor Wheel
GWWA28-10118Courtesy of AUDI OF AMERICA, LLC