Sensor Wheel, Checking
WARNING: This page is about a different car, the 2022 Audi S5, 2022 Audi RS 5, 2021 Audi S5, 2021 Audi RS 5, and 2020 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Gauge - Sender Wheel: T10473
CAUTION:
Do not place the sensor wheel near magnets (for example lamp base, speakers).
There is a risk of destroying the sensor wheel by magnetic force.
- Before installing the drive plate/flywheel or sensor wheel, check the function of the sensor wheel.
Procedure
- Sensor wheel removed. Refer to SENSOR WHEEL, REMOVING AND INSTALLING .
-- Check the entire circumference of the sensor wheel with the : T10473 as shown.
Sensor wheel test diagram
A - Sensor Wheel OK
B - Sensor Wheel Faulty