Chain TENSIONER, Removing And Installing: Installing

WARNING: This page is about a different car, the 2022 Audi S5, 2021 Audi S5, and 2020 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

Replace the seal after removal.

-- Install the upper timing chain cover. Refer to TIMING CHAIN GUARD UPPER SECTION, REMOVING AND INSTALLING .

-- If changes on the timing chain make place or components should be replaced, perform the corresponding adaptations in the Guided Functions "0001 - Engine electronics, functions". Use the Vehicle Diagnostic Tester.