Intake Manifold, Removing And Installing, 3.0L Engine, AUDI A8: Removing
WARNING: This page is about a different car, the 2022 Audi S5, 2021 Audi S5, and 2020 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Pay attention to the repair information. Refer to REPAIR INFORMATION .
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Loosen the hose clamp -1- and remove the air duct pipe.
-- Free up the wiring harness -3-.
-- Remove the crankcase ventilation hose -4- by pressing the release buttons on both sides.
-- Remove the bolts -arrows- and free up the intake manifold -2-.
-- If installed, remove the hose -1- for the EVAP system by pushing the release buttons on both sides.
-- Remove the crankcase ventilation hose -arrows- by pressing the release buttons on both sides.
-- Remove the intake manifold.