Overview - Engine Oil Cooler
WARNING: This page is about a different car, the 2020 Audi A5 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Sub-Assembly Bracket
- There are different versions. Refer to the Parts Information for the allocation.
- Removing and installing. Refer to Sub-Assembly Bracket, Removing And Installing .
- Seal
- Always replace after removing.
- O-Rings
- Always replace after removing.
- Coat with engine oil
- Mechanical Switch Valve
- Replacing. Refer to Mechanical Switch Valve, Removing And Installing .
- Engine Oil Cooler
- Removing and installing. Refer to Engine Oil Cooler, Removing And Installing .
- See note. Refer to Overview - Oil Pan/Oil Pump, Version 1 .
- Seal
- Always replace after removing.
- Coat with coolant
- Connection
- Bolt
- 8 Nm + 45°
- Always replace after removing.