Overview - Engine Mount
WARNING: This page is about a different car, the 2020 Audi A5 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Subframe
- Bolt
- 20 Nm
- Bolt
- 10 Nm
- Support Bearing
- Installation position. Refer to Figure.
- Removing and installing. Refer to Support Bearing, Removing And Installing .
- Bolt
- 55 Nm
- Engine Support
- Removing and installing. Refer to Engine Support, Removing And Installing .
- Heat Shield
- Bolt
- 10 Nm
- Bolt
- 55 Nm
- Engine Mount
- With
- Left Electrohydraulic Engine Mount Solenoid Valve -N144-
- Right Electrohydraulic Engine Mount Solenoid Valve -N145-
- Removing and installing. Refer to Engine Mount, Removing And Installing .
- With
- Bolt
- 90 Nm + 90°
- Always replace after removing.
- Bolt
- 30 Nm