Coolant Pump, Removing And Installing: Removing
WARNING: This page is about a different car, the 2020 Audi A5 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine cover. Refer to Engine Cover, Removing And Installing .
-- Drain the coolant. Refer to Coolant, Draining And Filling .
-- Disconnect the connectors -2 to 5-.
-- Remove the bolt -1- and move the bracket -2- with the engine wiring harness to the side.
Refer to Coolant Pump, Removing And Installing .