Overview - Coolant Pipes on Engine
WARNING: This page is about a different car, the 2020 Audi A5 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 9 Nm
- Coolant Hose
- Left Coolant Pipe
- Removing and installing. Refer to Left Coolant Pipe, Removing And Installing .
- Coolant Hose
- Bolt
- 20 Nm
- Bolt
- 9 Nm
- Bolt
- 20 Nm
- Right Coolant Pipe
- Removing and installing. Refer to Right Coolant Pipe, Removing And Installing, Vehicles Without Particulate Filter .
- O-Ring
- Always replace after removing.
- Coolant Hose
- Fold back and pry up the clip to remove the heat shield boot
- Connecting. Refer to Figure.
- O-Ring
- Always replace after removing.
- Bolt
- 6 Nm
- Coolant Hose