After-Run Coolant Pump -V51-, REMOVING AND INSTALLING, 2.9L ENGINE: Removing

WARNING: This page is about a different car, the 2022 Audi S5, 2022 Audi RS 5, 2021 Audi S5, 2021 Audi RS 5, and 2020 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the right catalytic converter (refer to CATALYTIC CONVERTER, REMOVING AND INSTALLING ) move with the heated oxygen sensor connected to the side and secure, to do so free up the wire.

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING, 2.9L ENGINE .

-- Remove the double bolt -2- and bolts -1- and remove the bracket for the After-Run Coolant Pump -V51-.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -3-.

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolt -arrow- using the : T10405 .

-- Loosen the hose clamp -1- and remove the After-Run Coolant Pump -V51- -2-.