Left Coolant Pipe, Removing And Installing, 2.9L Engine: Installing
WARNING: This page is about a different car, the 2022 Audi S5, 2022 Audi RS 5, 2021 Audi S5, 2021 Audi RS 5, and 2020 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
- Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.
- Used coolant cannot be used again.
-- Remove the engine support. Refer to ENGINE, SUPPORTING IN INSTALLATION POSITION .
-- Fill the coolant. Refer to COOLANT, DRAINING AND FILLING, 2.9L ENGINE .