LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (Crankshaft, Cylinder Block [CWGD,DECA]) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Vibration Damper, Removing And Installing >> Vibration Damper, Removing And Installing, 2.9L Engine >> Removing

Vibration Damper, Removing And Installing, 2.9L Engine: Removing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Audi S5, 2022 Audi RS 5 Sportback, 2022 Audi RS 5, 2021 Audi S5, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the radiator with fan shroud. Refer to RADIATOR, REMOVING AND INSTALLING, 2.9L ENGINE .

-- Remove the bolt -arrow-.

GWWA19-12720Courtesy of AUDI OF AMERICA, LLC

-- Loosen the hose clamp -1-, remove the coolant hose and push the front coolant pipe on the lower left side to the side.

All additional procedures are described. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals