Engine Support, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Audi S5, 2022 Audi RS 5 Sportback, 2022 Audi RS 5, 2021 Audi S5, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine mount. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .
Left Engine Support:
-- Remove the bolts -arrows- and the engine support -1-.
Right Engine Support:
-- Remove the rear noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .
-- Remove the right drive axle cover. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .
-- Remove the bolts -arrows- and push the right coolant pipe slightly to the side. (On vehicles with 3.0L engine).
-- Remove the bolts -arrows- and the engine support -1-.