Drive Plate, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Audi S5, 2022 Audi RS 5 Sportback, 2022 Audi RS 5, 2021 Audi S5, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
- The transmission is removed. Refer to the appropriate service information .
-- Insert the :10-201 to loosen the bolts.
CAUTION:
Risk of damaging the outer surface of the bearing flange at the drive plate due to incorrect handling.
- To loosen and tighten the drive plate bolt use the following tools.
-- Remove the bolts, drive plate -1- and sensor wheel.