Vibration Damper, Removing And Installing, 3.0L Engine: Removing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Audi S5, 2022 Audi RS 5 Sportback, 2022 Audi RS 5, 2021 Audi S5, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Preliminary work may be required depending on the model. Refer to the appropriate service information .
-- Remove the A/C compressor ribbed belt. Refer to RIBBED BELT FOR A/C COMPRESSOR, REMOVING AND INSTALLING, 3.0L ENGINE .
-- Remove the ribbed belt tensioner for the A/C compressor. Refer to RIBBED BELT TENSIONER FOR A/C COMPRESSOR, REMOVING AND INSTALLING, 3.0L ENGINE .
-- Remove the cover.
-- Remove the bolt -arrow- and the idler roller.
-- Place the :T40330/4 with :T40330/1 on the vibration damper and secure using the bolt -arrow- (23 Nm) to do so place the :T40330/3 underneath.
-- Remove the bolt -1-.
-- Remove the bolt -arrow- and remove the counterholder and vibration damper.