A/C Compressor Bracket, Removing And Installing, 3.0L Engine: Removing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Audi S5, 2022 Audi RS 5 Sportback, 2022 Audi RS 5, 2021 Audi S5, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Depending on the model, preliminary work may be required. Refer to SUB-ASSEMBLY BRACKET, REMOVING AND INSTALLING .
-- Remove the ribbed belt tensioner for the A/C compressor. Refer to RIBBED BELT TENSIONER FOR A/C COMPRESSOR, REMOVING AND INSTALLING, 3.0L ENGINE .
-- All models except A8: remove the A/C compressor from the bracket and tie it up to the left side. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING FROM BRACKET .
-- A8: remove the A/C compressor. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING .
-- Remove the bolts -2 and 3- and the bracket -1- for the A/C compressor.