LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Crankshaft, Cylinder Block [CWGD,DECA,CZSE,DLZA,DKMB,CZSA,DCBD,DCBE]) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Sub-Assembly Bracket, Removing And Installing >> A/C Compressor Bracket, Removing And Installing, 2.9L Engine Without Electrical Compressor >> Removing

A/C Compressor Bracket, Removing And Installing, 2.9L Engine Without Electrical Compressor: Removing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Audi S5, 2022 Audi RS 5 Sportback, 2022 Audi RS 5, 2021 Audi S5, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the A/C compressor from the bracket and tie it up on the left side. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING FROM BRACKET .

-- Remove the ribbed belt tensioner for the A/C compressor. Refer to RIBBED BELT TENSIONER FOR A/C COMPRESSOR, REMOVING AND INSTALLING, 2.9L ENGINE .

-- Remove the bolt -1-, and only loosen the nut -2-.

GWWA13-11250Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -2 and 3- and the bracket -1- for the A/C compressor.

Fig 1: A/C Compressor Bracket
GWWA13-11243Courtesy of AUDI OF AMERICA, LLC