Crankshaft, Removing And Installing: Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Audi S5, 2022 Audi RS 5 Sportback, 2022 Audi RS 5, 2021 Audi S5, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Puller - Unit Injector :T10055
- Torx Screw Driver - T25 :T10248
- Locking Pin (3 pc.) :T40011
- Puller :T40332
- Pull Rod :T40332/1
- Cross Bar :T40332/2
- Threaded Pins :T40332/3
- Adjusting Pin :T40362
Puller :T40332 , Preparing
-- Tighten the pull rod -1- with the bolts -arrows- as shown on the puller cross bar : T40332 .
-- Remove the threaded pins -2- for later assembly of the tool.