LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (Cylinder Head, VALVETRAIN [CWGD,DECA,CZSE,DLZA,DKMB,CZSA,DCBD,DCBE]) >> 15 Cylinder Head, VALVETRAIN >> Chain Drive >> Chain TENSIONER, Removing And Installing >> Installing

Chain TENSIONER, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Audi S5, 2022 Audi RS 5 Sportback, 2022 Audi RS 5, 2021 Audi S5, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Install the upper timing chain cover. Refer to TIMING CHAIN GUARD UPPER SECTION, REMOVING AND INSTALLING .

-- If changes on the timing chain make place or components should be replaced, perform the corresponding adaptations in the Guided Functions  "0001 - Engine electronics, functions". Use the Vehicle Diagnostic Tester.