Engine, Removing From Scissor Lift Table, 3.0L Engine
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Audi S5, 2022 Audi RS 5 Sportback, 2022 Audi RS 5, 2021 Audi S5, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Lifting Tackle :3033
- Shop Crane :VAS6100
- Lift Arm Extension :VAS6101
- Scissor Lift Table :VAS6131B
Procedure
- Engine/transmission assembly removed and separated on :VAS6131B . Refer to ENGINE AND TRANSMISSION, SEPARATING, 3.0L ENGINE .
WARNING:
Risk of accident!
- The engine may only be transported in the manner described and without the transmission.
-- Attach the :VAS6101 to the :VAS6100 .
-- Engage the :3033 on the engine lifting eyes and on the shop crane as shown.
-- Pry up the engine with the workshop crane.