Line Routing And Securing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Audi S5, 2022 Audi RS 5 Sportback, 2022 Audi RS 5, 2021 Audi S5, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
There is a risk of damaging the lines.
The lines can be damaged by the moving or hot components.
-- Route the wires in the original cable guide.
-- Ensure sufficient clearance to moving or hot components.
- Mark the individual fuel, hydraulic and vacuum lines, EVAP system as well as the wires before removing them. This will prevent interchanging them and will ensure the original installation position. Draw sketches or take pictures of them if required.
- After securing the fuel and coolant lines and checking their routing, they must be inserted in their brackets and may not contact other components.