Engine Oil Cooler, Removing And Installing: Installing

WARNING: This page is about a different car, the 2020 Audi A5 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

Replace the seal after removal.
Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.

-- Install the engine oil cooler -3- with a new seal -2-.

Fig 1: Identifying Oil Cooler, Bolts And Seal

Courtesy of AUDI OF AMERICA, LLC

-- Install the sub-assembly bracket. Refer to SUB-ASSEMBLY BRACKET, REMOVING AND INSTALLING .