Oil Separator, Removing And Installing: Removing
WARNING: This page is about a different car, the 2020 Audi A5 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the cylinder ignition coils "3 and 4". Refer to IGNITION COILS WITH POWER OUTPUT STAGES, REMOVING AND INSTALLING .
-- Loosen the hose clamp -1- and remove the hose from EVAP Canister Purge Regulator Valve 1 -N80-.
-- Remove the bolt -2- and remove the crankcase ventilation hose -3- from oil separator. Release the catches to do so if necessary.
-- Remove the bolts -arrows- and the oil separator.