Upper Timing Chain Cover, Removing And Installing: Installing
WARNING: This page is about a different car, the 2020 Audi A5 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
- Replace the seals and O-rings after removal.
- Seal installation position: smaller inner diameter outward.
-- Install the camshaft adjustment valves. Refer to Cam Adjustment Valve 1 -N205- /Exhaust Cam Adjustment Valve 1 -N318-, REMOVING AND INSTALLING .
There are additional procedures depending on the model. Refer to the appropriate service information .