Drive Plate, Removing And Installing: Removing
WARNING: This page is about a different car, the 2020 Audi A5 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Transmission removed. Refer to the appropriate Service Information .
-- Insert the : 10-201 to loosen the bolts.
CAUTION:
Risk of damaging the drive plate by using an unsuitable tool.
- When loosening and tightening the bolts, do not damage the drive plate centering flange.
-- Remove the drive plate bolts -1- using an internal multi-point socket with at least a 40 mm shaft length.