Left Engine Support, Removing And Installing: Removing
WARNING: This page is about a different car, the 2020 Audi A5 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Lift the clamp -3-, remove and free up the coolant hose.
-- Disconnect the connector -1- for the Engine Coolant Level Warning Switch -F66-.
-- Remove the bolt -4-, and push the coolant expansion tank -2- to the side.
-- Remove the upper bolts -2- for the engine support -1-. (Shown with the engine removed.)
-- Remove the left support bearing. Refer to SUPPORT BEARING, REMOVING AND INSTALLING .
-- Remove the left engine mount. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .
-- Disconnect the connector -arrow- for the A/C compressor.
-- Remove the lower bolts -3- and the left engine support -1-.