Special Tools
Special tools and workshop equipment required
- Elbow Assembly Tool: T10118
- Assembly Tool : T10352/2
- Seal Installer - Crankshaft: T10354
- Press Piece - Gearbox: T10375
- Vibration Damper Assembly Tool - Knurled Nut: T10531/4
from the Vibration Damper Assembly Tool: T10531
- Valve Cotter Tool Kit - Adapter: T40012
- Camshaft Spacer: T40191
- Chain Tensioner Lever: T40243
- Wrench - 21mm: T40263
- Socket - Xzn 12: T40270
- Camshaft Locks: T40271
- Seal Installer - Crankshaft: T40274
- Adapter: T40314
- Fitting Tool: T40376/1
for the valve stem seal with a double sealing lip. Refer to Figure.
- Assembly Tool: T40427
- Locking Tool: T40435
- Compression Tester Kit: VAG1763
- Valve Keeper Tool Kit: VAS5161A
with the Valve Cotter Tool Kit - Guide Plate: VAS5161/19C
- Dial Indicator - 0-10mm: VAS6079
- Engine and Transmission Holder: VAS6095A
- Engine Bung Set: VAS6122
- Hose Clip Pliers: VAS6362
- Cylinder Head Tensioning Device: VAS6419
- Dial Indicator Holder: VW387
- Spark Plug Removal Tool: 3122B
- Puller - Valve Seal: 3364
- Seal Installer - Valve Stem: 3365
for the valve stem seal with a single sealing lip. Refer to Figure.