Overview - Charge Air System

Fig 1: Exploded View Of Charge Air System

Courtesy of AUDI OF AMERICA, LLC

Charge Air Cooler
- Removing and Installing. Refer to CHARGE AIR COOLER, REMOVING AND INSTALLING .
- If there are small impressions on the fins. Refer to RADIATOR AND CONDENSER ASSEMBLY .
Air Duct Hose
- Must be free of oil and grease before installing
From the Turbocharger
Bolt
- Position the bolt by hand and tighten it until it finds the old threads. Then tighten the bolt to the specification.
- 7 Nm
- Thread cutting
Charge Air Pressure Sensor -G31-
- There are different versions.
- Removing and Installing. Refer to Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING .
O-Ring
- Not available separately; replace if leaking -item 5- OVERVIEW - CHARGE AIR SYSTEM => List Item:Charge Air Pressure Sensor -G31- or damaged
to Intake Manifold
Seal
- Replace if damaged
Air Duct Pipe
- There are different versions.
- Must be free of oil and grease before installing
Seal
- Replace if damaged