Overview - Spring

Fig 1: Spring With Upper/Lower Spring Support & Rear Lower Transverse Link

Courtesy of AUDI OF AMERICA, LLC

1. Rear Lower Transverse Link
   • Removing and installing. Refer to REAR LOWER TRANSVERSE LINK, REMOVING AND INSTALLING .
     WARNING:

     If the coil spring breaks resulting in surface damage to the transverse link, then the transverse link must be replaced.

2. Coil Spring
   • Removing and installing. Refer to SPRING, REMOVING AND INSTALLING .
   • Installation position. Refer to Fig 2.
3. Upper Spring Support
   • Installation position. Refer to Fig 2.
4. Lower Spring Support
   • Installation position. Refer to Fig 2.

Coil Spring and Spring Plate Installation Position 

Fig 2: Coil Spring and Spring Plate Installation Position

Courtesy of AUDI OF AMERICA, LLC

• The end of the spring -1- must be positioned to the stop on the spring plates -2- -arrow-.
• The positioning pins of the spring plate must engage at the top in the holes in the body -3- and at the bottom in the holes in the rear transverse link -4- as shown.