Overview - Vacuum Pump, 2.0L TFSI Engine

Fig 1: Overview - Vacuum Pump, Vehicles With 2.0L TFSI Engine

Courtesy of AUDI OF AMERICA, LLC

Vacuum Pump
- Removing and Installing. Refer to Vacuum Pump, Removing And Installing, 2.0L TFSI Engine .
Seal
- Replace after removing.
Vacuum Hose
Bolt
- 8 Nm +180°
- Replace after removing.
Vacuum Line
- From EVAP Canister Purge Regulator Valve 1 -N80- to EVAP canister
Bolt
- 9 Nm
Bolt
- 9 Nm
Bolt
- Tightening specification. Refer to Overview - High Pressure Pump .
High Pressure Pump
- Removing and Installing. Refer to Overview - High Pressure Pump .
O-Ring
- Replace after removing.