Overview - Rear Seat Backrest, 2-Person Rear Seat

Fig 1: Exploded View Of Rear Seat Backrest, 2-Person Rear Seat

Courtesy of AUDI OF AMERICA, LLC

1. Release Cable
   • For remote backrest release
2. Outer Bearing Sleeve
   • Removing and Installing. Refer to OUTER BEARING SLEEVE, REMOVING AND INSTALLING .
   • Place in the backrest frame and push until stop.
3. Right Rear Seat Backrest
   • Removing and Installing. Refer to OUTER REAR SEAT BACKREST, REMOVING AND INSTALLING, A5 COUPE/SPORTBACK .
4. Center Rear Seat Backrest
   • Removing and Installing. Refer to CENTER REAR SEAT BACKREST, REMOVING AND INSTALLING, A5 COUPE/SPORTBACK .
5. Bolt
   • 8 Nm
6. Securing Bracket
   • For the center bracket
   • Removing and Installing. Refer to CENTER BRACKET, REMOVING AND INSTALLING .
7. Inner Mounting Pin
   • 15 Nm
   • Removing and Installing. Refer to INNER MOUNTING PIN, REMOVING AND INSTALLING .
8. Center Support
   • Removing and Installing. Refer to CENTER BRACKET, REMOVING AND INSTALLING .
9. Bolt
   • 20 Nm
   • Quantity: 4
10. Inner Bearing Sleeve