Speaker Trim, Removing And Installing

Special tools and workshop equipment required

Wedge Set: T10383

Center Speaker Trim, Removing:

-- Detach the speaker trim -1- using the : T10383/1 in direction of -arrow- by sliding the wedge approximately 2 mm in the seam under the speaker trim.

Fig 1: Speaker Trim

Courtesy of AUDI OF AMERICA, LLC

-- Disengage the remaining tabs for the speaker trim along the seam.

-- If necessary, insert a long screwdriver forward under the speaker trim and disengage the front retaining pin.

Outer Speaker Trim, Removing:

Fig 2: Outer Speaker Trim

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

There is a risk of damaging the speaker trim.

Proceed very carefully when removing and installing.

-- Using the : T10383/1 , carefully detach the speaker trim -1- along the seam in direction of -arrow- by inserting the wedge approximately 2 mm into the seam under the speaker trim.

-- Release the remaining retainers for the speaker trim and remove it.

Installing

Install in reverse order of removal.